Wi6BS, Wi9BS - Fluorine free
Brass valve and safety device for the highest demands on quality and safety
The DÖKA cartridge operated fire extinguishers of the BS series are equipped with a high-quality push button valve and cap nut made of nickel-plated brass. In addition to the standard, the BS series is also equipped with an additional pressure relief valve with a brass body, which protects the cylinder from excess pressure. The generous dimensioning of the safety device and strike button enables the fire extinguisher to be operated with gloves. The ergonomic handle with finger recesses and slip protection offers excellent carrying comfort. The rotating extinguishing pistol enables optimal control of the extinguishing agent jet and the operation of the fire extinguisher with just one hand.
The DÖKA BS series is the highest quality equipment variant of our rechargeable fire extinguishers. High-quality materials, the ergonomic design and the extensive selection of different types of fire extinguishers. We offer frost-proof wet and grease fire extinguishing agents as well as special extinguishing devices exclusively in the BS series. The PREMIUM LINE for the highest demands on quality, reliability and safety.
The DÖKA cartridge operated water fire extinguishers of the BS-series with internal propellant cartridge. The fire extinguisher is only put under operating pressure after pulling the securing and depressing the push button when it is in use. This ensures a high level of operational reliability, saves material and minimizes maintenance costs.
The extinguishing effect is based on the heat binding capacity (heat capacity) of the water. The seat of the fire is cooled down considerably and the combustion is stopped. The extinguishing agent consists of water with and the addition of highly effective additives. As a result, our water fire extinguishers achieve excellent ratings in fire class A. The extinguishing agent is completely free of PFOS and PFOA.
Fire class A, combustible solid materials
such as wood, car tires, textiles
Up to 1.000 V, minimum distance 1 meter
Areas of application
Administration and production areas, car workshops, sales rooms, guest areas in hotels and restaurants, schools, public areas, cinemas, discos, private areas
Capacity: 6 ltr. Aqueous solution
Dimensions H x W x D ca. mm: 560 x 235 x 170
Weight ca. kg: 10,4
Throw range ca. m: 9-11
Discharge time ca. Sek.: 41
Operating temp. °C: 0 to +60
Capacity: 9 ltr. Aqueous solution
Dimensions H x W x D ca. mm: 620 x 270 x 195
Weight ca. kg: 15,0
Throw range ca. m: 9-11
Discharge time ca. Sek.: 76
Operating temp. °C: 0 to +60
The body of the push button valve is made of nickel-plated brass. All other components such as hose, riser pipe, blow pipe and propellant gas cartridge are mounted on the base body. Nickel-plated brass is significantly more resistant to extinguishing media and environmental influences and therefore more durable than plastic fittings. For this reason we only offer certain device versions in the BS series, such as frost-proof water and foam extinguishers. We also offer fire extinguishers with MED approval, i.e. for use on ships, only in the BS series.
The safety valve is installed according to the requirements of the DIN EN 3 standard. It is a spring-loaded pressure relief valve, which releases any impermissible operating pressure and closes it again, thus protecting the container. This means even more security for the user. The safety valve is also mainly made of brass.
The large, ergonomically shaped handle for easy handling of the fire extinguisher. The recessed grips and the curve at the end of the handle prevent your hand from slipping. The handle is big enough to be able to carry the fire extinguisher comfortably even with gloves. For stability and durability, the solid handle is made of fiberglass-reinforced plastic and is attached to the base plate with a stainless steel grooved pin.
The cap nut, like the base plate, is made of nickel-plated brass. It is equipped with pressure relief grooves through which the possibly pressurized extinguishing agent container can be safely depressurized by an expert. There are four cams on the nut for easy opening of the fire extinguisher, for safe, ergonomic use of the tool during service.
The extinguishing agent cylinder made of high-quality sheet steel is provided with a very high quality, resistant polyester resin coating that reliably protects the cylinder against corrosion.
The label is applied using a modern, high-quality screen printing process. The operating screen of the fire extinguisher is printed in two languages, German / English. Large, easy-to-interpret pictograms enable the fire extinguisher to be operated quickly and easily. The warning notices are printed inverted for better perception.
A footring made of impact-resistant HD-PE is used to protect the bottom of the Cylinder and for improved stability. The foot ring is simply placed on the cylinder and can be removed non-destructively for service purposes. A holder for the hose line is integrated in the stand ring and ensures that the fire extinguisher looks attractive.
The high-quality hose is made of durable EPDM synthetic rubber material. Fabric inserts increase the stability and pressure resistance of the hose line. A nickel-plated brass grommet is used for the hose connection to the fitting, which is firmly pressed to the hose line.
Flexible even in the cold - the hose is still flexible even in extreme cold and does not break.
The extinguishing pistol can be freely rotated 360 degrees, which means much more comfort and safety for the user. The large lever enables very good extinguishing agent dosing. The extinguishing pistol has a patented safety valve effect - if the pressure is too high, the pistol opens automatically, which means that the pistol cannot burst.